Special pump factory professional sharing: KCB gear oil pump structure characteristics and performance range

KCB-type gear pump structural features:

　　 KCB gear oil pump mainly consists of gear, shaft, pump body, safety valve and shaft end seal (special requirements, optional magnetic drive, zero leakage structure). The gears are heat treated to have a high hardness and strength and are mounted with the shaft in a replaceable bushing. Lubrication of all parts in the pump is automatically achieved using the output medium while the pump is operating.

　　 The KCB gear oil pump has a well-designed oil drain and oil return groove. It is the smallest torque force that the gear can withstand during operation. Therefore, the bearing load is small, the wear is small, and the pump efficiency is high.

　　 The KCB gear oil pump is equipped with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times the rated pressure of the pump . It can also be adjusted according to actual needs within the allowable discharge pressure range. However, note that this safety valve cannot be used for long-term work of the pressure reducing valve. It can be installed separately on the pipeline when needed.

Seen from the overhanging end of the spindle to the pump, it rotates clockwise.

KCB gear oil pump performance range :

　　 KCB-type gear pump for conveying solid particles and fibers, non-corrosive, temperature not higher than 80 ℃, a viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) lubricating or properties Other liquids like lubricating oil.

KCB gear oil pump is suitable for conveying various lubricated liquids . The temperature is not higher than 70 °C . If high temperature is 200 °C , it can be used with high temperature resistant materials . The viscosity is 5 × 10-5 ~ 1.5 × 10-3m2 /S. This pump is not suitable for conveying corrosive , hard particles or fibers , highly volatile or low flash point liquids , such as gasoline , stupid .

See more: http://