Blue Precision Pump Industry | Product Description of FY Corrosion Resistant Submerged Pump

The FY type corrosion-resistant submerged pump is used to transport liquids that do not contain solid particles. The corrosive viscosity of the abrasive is similar to that of water. The marking, rated performance point and flange connection size are equivalent. FY type anti-corrosion submerged pump adopts international standard ISO5199-1986, the latest national standard JB/T3886-93, compared with the original FY type corrosion-resistant submerged pump, it has small volume, high efficiency, good energy saving effect, no leakage. , reliable operation and so on.

FY type anti-corrosion liquid pump delivery medium temperature is generally 1-105 °C to meet the needs of the process, special requirements in the purchase order, the medium temperature can be used normally at -20 ~ 180 °C. For example, the use of cooling jacket and insulation jacket, high temperature resistant and anti-guide bearing and other general Y-type ordinary motor, such as the transport medium contains traces of solid particles, the sliding bearing is externally lubricated (that is, by externally connected with water or grease greater than 0.2Mpa) ) YB type explosion-proof type motor can also be used as needed.

According to the corrosion condition of the conveying medium, the material of the FY type anti-corrosion liquid pump is 1Cr18Ni9, 1Cr18Ni12M02Ti, cast iron HT200. The code of other materials adopts the international material code or the domestically recognized material code.



This article reprinted: http://