Hebei Kun Teng Pump Co., Ltd. KTTL series desulfurization pump technical characteristics

KTTL series desulfurization pump is a single-stage, single-suction horizontal centrifugal pump developed by Hebei KunTeng Pump Co., Ltd. The pump has the advantages of safe and reliable, easy maintenance, long service life and low operation cost advantage. So what are the characteristics of the pump technically? The following is about the technical characteristics of the KTTL series desulfurization pump produced by Hebei Kun Teng Pump Co., Ltd. Technical characteristics of KTTL series desulfurization pump produced by Hebei KunTeng Pump Co., Ltd. 1. Pump adopts advanced design method in design, which makes the pump safe and reliable in operation, high in efficiency and long in service life. 2. Pump rotor with axial adjustment structure, the impeller ring can be adjusted to the minimum axial clearance (about 0.5mm), the pump is in efficient operation. 3. Pump end bearings with wide cylindrical roller bearings, only to bear the front radial load: the rear (pump end) with narrow cylindrical roller bearings, only to bear the radial load at the end: the pump axial force Using SKF four-point contact ball bearings (installed in the tail) to withstand. These three bearings are pure rolling bearings (tapered roller bearings to eliminate the large end face of the inner race and the shoulder block sliding friction and bear the front-end radial load and the axial force of the pump and the bearing temperature is high Of the drawbacks), and their respective roles, therefore, can significantly reduce the bearing temperature, improve bearing life. 4. Bracket with horizontal open, easy to clean and overhaul bearings, in addition, the bracket has a larger reservoir, and provides for the use of clean "L-Fc-46" bearing oil, which to some extent also played To reduce the bearing temperature and improve the role of life. 5. The bearing gland is provided with a clear labyrinth seal to ensure that the bearing assembly will not leak. 6 mechanical seal is based on the structural characteristics of the desulfurization pump, manufacturing accuracy, slurry characteristics and the use of features designed for desulfurization pump designed mechanical seal, it has high reliability, long life and other advantages. 7. The pump is designed to be disassembled. Simple structure, easy maintenance, without removing the pump inlet and outlet pipes. 8. The pump overcurrent element adopts a new type of corrosion-resistant and wear-resistant cast iron which is completely suitable for the desulfurization slurry characteristics, which improves the service life of the pump. Read more: Pumps Valves Pipe Fittings Exhibitions Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Fair Mold Top Ten Brands Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http://beng.liuti.cn/ (service hotline:)