The reason why the dosing machine automatically starts after skipping

With respect to the quantitative feeder, which starts automatically after jumping and stopping, it can be analyzed from two aspects; strictly speaking, there is little chance of this possibility:
1. After the dosing feeder has jumped and stopped, it cannot be started automatically: because the dosing machine of the dosing feeder has jumped to a great extent, the scale body and the control system have been broken down to a great extent. Therefore, when a problem occurs in the equipment, The dosing feeder is simply not automatically turned on after a jump stop;
2. It is a quantitative feeder that automatically starts again after jumping and stopping: We all know that when selecting the type for customers, we need to clearly determine the delivery volume at the customer site, the maximum amount, the minimum amount, and the commonly used amount. According to these three quantities, choose the right dosing machine specifications for customers, and give a part of the allowance in the basis of the maximum amount of customers given in Shanghai. The purpose is to prevent the transport volume from exceeding when the dosing feeder is in operation. The set amount causes the doser to malfunction. This is related to today's topic. When the delivery capacity of the dosing feeder exceeds the set amount of the dosing feeder control system in the working state, the speed of the belt operation will be slower and slower. At this time, the dosing feeder has The phenomenon of skipping may occur, but in a short period of time when the delivery volume becomes smaller again, the dosing feeder will automatically start again. At this time, the dosing feeder will resume normal operation; this is the so-called quantitative dosing machine after jumping and then automatically The reason for opening.
There are many reasons for the failure of the dosing feeder. We can judge the solution of the dosing machine after the fault according to the customer's situation; therefore, we can have two reasons for the automatic opening of the dosing feeder after the trip. Consider the aspects to solve the problem for the customer.