Polymer Preparation Unit for Automatic Polymer Dosing System

Automatic Polymer Dosing System is a continuous polymer makeup and dosing equipment. The equipment can mix the polymer fully with high efficiency, and then the homogeneous activated polymer can be ready for further treatment. Widely applied as the supporting equipment of sludge dewatering equipment in municipal wastewater, slaughtering, chemical plant and etc.

Topic: Polymer Preparation Unit for Automatic Polymer Dosing system

Polymer Dosing System developed by Maoyuan is well known for the high quality and efficiency, its great features include:

1. Easy to operate, labor saving
Precast mixing tank, homogeneous slaking tank and solution storage tank are in one equipment, easy to learn and easy to operate, saving labor.
2. Polymer concentration is adjustable
Water and polymer can get into the tank at the same time, as the flowing rate of the feeding pump can be controlled, so any concentration (within a certain range) can be prepared according to the actual requirements.
3.Well designed machine frame
Precious conveying, delicate pre-soaking device and the constant temperature heating method can reduce agglomeration phenomenon caused by improper operation and prevent the line from clogging, so as to ensure the stable concentration.
4. Trustworthy operation
The unique structure and proper rotating speed of the mixer not only can ensure the homogenization solution, but also will not destroy the polymer molecular chain.
5. Better performance, better environment
First class spare parts to ensure excellent performance, low noise and low vibration.

Components Display


Working Principle

1. Adding dry polymer into the hopper, the polymer later will be sent to the pre-soaking part by dosing device, then opening the water inlet so the polymer will drop into the mixing tank by gravity.
2. Initial Polymer solution will flow into the homogeneous slaking tank through the overflow, after a certain time of low-speed stirring, the solution will be homogeneous, curing and active, by then the solution will flow into the storage tank and it is ready for feeding.
3. When the storage tank is full, the liquid level switch gives signals and the polymer dosing device and solenoid valve will shut down automatically. At this point the dissolved solution is ready, and the indicator for "Ready" is on.
4. Open the dilution water valve when starting the polymer feeding pump, then the constant concentration solution will be diluted to the required concentration according to the actual usage, and then the solution can be poured into the required equipment.
5. Once the liquid level of the storage tank reaches the low position set earlier, the liquid level switch will give signals, and the system will repeat step 1, 2 and 3 above automatically to ensure the quantity of the solution.

Why Us

SATISFACTORY SERVICE

• Quick Response Time, 7×24 hours Technical Consultation
• Feel Free to consult, customized solution for your application
• Engineers are available to service machinery overseas
• Factory audit is welcomed
• Our extinguished clients include BASF, Tialoc and CNPC.
• Train how to install and operate the machine
• Complete video operation tutorial

ADVANCED DEWATERING TECHNOLOGY

• Design for Dewatering Applications
• R&D Cooperation with Tsinghua University
• Superior Raw Materials
• Laser cutting adopts Trumpf technology and the anti-corrosion materials adopts Starck technology
• First professional screw press production line in China

About Model Selection 
About Us


FAQ
Q1. Are you a factory or a trading company? 
A: We belong to a factory, so we can control every aspect of the product and provide best quality with lowest price for you. 

Q2. How do you ship the goods and how long does it take to arrive? 
A: Airline and sea shipping also optional. Shipping time depends on distance. 

Q3. Is it OK to print my logo on the product? 
A: Yes, but inform us formally before our production. 

Q4. Is there any other equipment used in sludge treatment? 
A: Yes, including polymer dosing system, sludge thickener, conveying device, rotary drum screen, coarse screen, paddle dryer, dissolved air flotation, sludge scraper bridge and etc. If you are interested, contact us for further information. 

Thank you for visiting our site, please feel free to contact us if you have further questions. Find me by the following methods, or write down your requirements below, we will always be happy to answer your questions.  

  Automatic Polymer Dosing System is a continuous polymer makeup and dosing equipment. The equipment can mix the polymer fully with high efficiency, and then the homogeneous activated polymer can be ready for further treatment. Widely applied as the supporting equipment of sludge dewatering equipment in municipal wastewater, slaughtering, chemical plant and etc.

Topic: Polymer Preparation Unit for Automatic Polymer Dosing system

Polymer Dosing System developed by Maoyuan is well known for the high quality and efficiency, its great features include:

1. Easy to operate, labor saving
Precast mixing tank, homogeneous slaking tank and solution storage tank are in one equipment, easy to learn and easy to operate, saving labor.
2. Polymer concentration is adjustable
Water and polymer can get into the tank at the same time, as the flowing rate of the feeding pump can be controlled, so any concentration (within a certain range) can be prepared according to the actual requirements.
3.Well designed machine frame
Precious conveying, delicate pre-soaking device and the constant temperature heating method can reduce agglomeration phenomenon caused by improper operation and prevent the line from clogging, so as to ensure the stable concentration.
4. Trustworthy operation
The unique structure and proper rotating speed of the mixer not only can ensure the homogenization solution, but also will not destroy the polymer molecular chain.
5. Better performance, better environment
First class spare parts to ensure excellent performance, low noise and low vibration.

Components Display


Working Principle

1. Adding dry polymer into the hopper, the polymer later will be sent to the pre-soaking part by dosing device, then opening the water inlet so the polymer will drop into the mixing tank by gravity.
2. Initial Polymer solution will flow into the homogeneous slaking tank through the overflow, after a certain time of low-speed stirring, the solution will be homogeneous, curing and active, by then the solution will flow into the storage tank and it is ready for feeding.
3. When the storage tank is full, the liquid level switch gives signals and the polymer dosing device and solenoid valve will shut down automatically. At this point the dissolved solution is ready, and the indicator for "Ready" is on.
4. Open the dilution water valve when starting the polymer feeding pump, then the constant concentration solution will be diluted to the required concentration according to the actual usage, and then the solution can be poured into the required equipment.
5. Once the liquid level of the storage tank reaches the low position set earlier, the liquid level switch will give signals, and the system will repeat step 1, 2 and 3 above automatically to ensure the quantity of the solution.

Why Us

SATISFACTORY SERVICE

• Quick Response Time, 7×24 hours Technical Consultation
• Feel Free to consult, customized solution for your application
• Engineers are available to service machinery overseas
• Factory audit is welcomed
• Our extinguished clients include BASF, Tialoc and CNPC.
• Train how to install and operate the machine
• Complete video operation tutorial

ADVANCED DEWATERING TECHNOLOGY

• Design for Dewatering Applications
• R&D Cooperation with Tsinghua University
• Superior Raw Materials
• Laser cutting adopts Trumpf technology and the anti-corrosion materials adopts Starck technology
• First professional screw press production line in China

About Model Selection